Skip to content
Thermetrics
Test Standards Thermetrics Systems
  • View all products
  • Full body manikins
  • ANDI Thermal Manikin
    ANDI Thermal Manikin

    Simulate human physiology and test garments for heat loss and gain.

  • Newton Thermal Manikin
    Newton Thermal Manikin

    Thermal manikin designed for clothing and environmental testing.

  • Liz Female Thermal Manikin
    Liz Female Thermal Manikin

    Thermal manikin designed for clothing and environmental testing on the female form.

  • Baby Thermal Manikin
    Baby Thermal Manikin

    Test thermal comfort properties of infant clothing and gear.

  • Partial manikins
  • Thermal Head Test System
    Thermal Head Test System

    Put helmets and headwear to the test by accurately measuring heat loss.

  • Thermal Hand Test System
    Thermal Hand Test System

    Research the effects of glove design, insulation, and ventilation.

  • Textile testing systems
  • Sweating Guarded Hotplate
    Sweating Guarded Hotplate

    Get accurate, repeatable measurements of thermal resistance (Rct) and vapor permeability (Ret) for textiles.

  • Dynamic Hotplate System
    Dynamic Hotplate System

    Test prototype swatches for positive and negative heat-flux measurements.

  • Drying Rate Tester 201
    Drying Rate Tester 201

    Measure and assess key moisture management features of your textiles with precision and ease.

  • Protective test systems
  • Flame Test Manikin
    Flame Test Manikin

    Test the performance of garments or protective clothing ensembles in a simulated flash fire environment.

  • Flash Fire Cylinder
    Flash Fire Cylinder

    A bench-top textile fire retardant testing cylinder.

  • TPP / HTP Test Device
    TPP / HTP Test Device

    Evaluate a fabric’s ability to block convective and radiant heat penetration to avoid burn injury.

  • Transportation
  • Automotive HVAC Manikin
    Automotive HVAC Manikin

    Measure passenger comfort and environmental conditions in automobile and transit cabins.

  • STAN Thermal Manikin
    STAN Thermal Manikin

    Test thermal comfort and moisture management characteristics of automobile, truck, and airplane seating.

  • Customized solution
  • Help me choose
Custom Solutions
  • Create your solution
  • Test standards
  • Find your product
  • Service and calibration
  • Rentals
  • Events
  • Blog
  • FAQs
  • Webinars
  • Case studies
  • About
  • Contact
  • Parts store

Information

ICEE in Niagara Falls!

Thermetrics was honored to be a co-sponsor of the 19th International Conference on Environmental Ergonomics (ICEE).   Shout out to Dr. Stephen Cheung, the ICEE Conference organizing committee, and everyone who attended the Sept 2022 conference in Niagara Falls.     What is ICEE? ICEE is a biennial gathering for researchers, practitioners, and anyone with […]

What IS a Testing Continuum?

In our earliest days at Thermetrics, our customers helped us understand that a unidimensional approach to product testing only tells you part of the story.   The need for a comprehensive and multi-tiered testing sequence is even more apparent when the products you’re developing are the vital tools of performance and safety for end users […]

Newton’s ManikinPC physiological (Human Comfort) software update

ManikinPC (Manikin Physiology Control and Predictive Comfort) software is a closed-loop feedback control system for Newton thermal manikins that accurately mimics the human thermoregulatory system and provides metrics for comfort and sensation.  In fact, any level of activity can be input and appropriate metabolic wattages will be imposed onto the manikin. At the core of […]

If you’re ever in the neighborhood…

Fisherman’s Terminal (located on Salmon Bay in the Interbay neighborhood of Seattle, Washington, just east of the Hiram M. Chittenden Locks and immediately west of the Ballard Bridge) was officially established in 1914 by the Port of Seattle as the home port for the North Pacific Fishing Fleet – which nowadays includes some of the […]

HVAC Development Roadmap: Aligning Your Simulation and Measurement Tools

As the transportation industry moves to higher levels of electrification and incorporates more sophisticated cabin climate control systems, tools to develop and validate performance must follow suit.  Energy efficiency and occupant thermal comfort have risen to the level of importance previously reserved for cabin temperature. A recent post by ThermoAnalytics, our Calumet, MI colleagues, “Solving for […]

A tale of two STANs

Project Profile Centro Richero Fiat, in early 2001, was the first automobile manufacturer (and second user overall, after Delphi in 1998) to purchase Measurement Technology Northwest’s STAN Seat Test manikin system. For 10+ years, our STAN’s hot, sweaty backside was a fixture in the Fiat testing lab ably and accurately measuring the thermal comfort characteristics of […]

CDC/NIOSH Newton 34-zone Thermal Manikin System

Project Profile In 2010 the National Personal Protective Technology Laboratory in Pittsburg, USA acquired a 34-zone Thermetrics Newton sweating thermal manikin for assessing protective clothing and equipment (PPE)characteristics and their effects on the individuals wearing them. Dr. Aitor Coca, Research Physiologist at the CDC/NIOSH lab, explains the reasoning behind their purchase: “The 34-zone configuration allows […]

Thermetrics Rents Manikins!

Thermetrics’ advanced Newton 26-zone sweating thermal manikin, STAN seat test manikin, and the HVAC Automotive manikin are available for rent/hire. These complete turn-key systems include manikin, laptop PC, ThermDAC control software, startup and training at the client facility, as well as ongoing technical support. Thermetrics has prepared these rental systems because there are times when a manikin rental makes more sense than […]

Total Fire Group

When your mission is to make the best fire-fighting protective gear on earth, you need to pay attention to some serious details – fabric heat protection, moisture transmission, flexibility, durability, and weight are just some of the safety variables that must be thoroughly tested before a fire-fighting garment is certified for use by any of […]

Custom 32-zone Newton

Project Profile The University Centre for Energy Efficient Buildings (UCEEB) is an independent institute of the Czech Technical University in Prague. UCEEB’s goal is to research and design buildings which are green, smart, reasonably-priced, and with a healthy interior climate.  As stated by the institute’s founder, Professor Zdeněk Bittnar, “Buildings represent an area with significant […]

  • 1
  • 2

Thermetrics office

Address:
4220 – 24th Avenue West
Seattle, WA 98199-1216

Phone: (206) 456-9119
Fax: (206) 634-1309
Email:  sales@thermetrics.com

Hours:  Weekdays 9:00 AM to 5:00 PM, Pacific Time.

 

We are closed on all US national holidays.

Get a quote

    You may unsubscribe from these communications or withdraw your consent at any time. For more information on how to unsubscribe, our privacy practices, and how we are committed to protecting and respecting your privacy, please review our Privacy Policy.

    Get in touch

    Hello! What's on your mind? Fill out the form below, and let's talk!

      Are you considering an equipment purchase?

      Are you looking for help with product testing?

      Are you looking for help with an existing product?

      You may unsubscribe from these communications or withdraw your consent at any time. For more information on how to unsubscribe, our privacy practices, and how we are committed to protecting and respecting your privacy, please review our Privacy Policy.

      Home » Information

      Thermetrics
      • About
      • Create your solution
      • Find your product
      • Service and calibration
      • Blog
      • Contact
      • Privacy Policy

      © 2023 Thermetrics. Site by Motive.

      STAY CONNECTED WITH THERMETRICS

        https://thermetrics.com/wp-content/uploads/2021/07/thermetrics-compressed.mp4