Skip to content
Thermetrics
Test Standards Thermetrics Systems
  • View all products
  • Full body manikins
  • ANDI Thermal Manikin
    ANDI Thermal Manikin

    Simulate human physiology and test garments for heat loss and gain.

  • Newton Thermal Manikin
    Newton Thermal Manikin

    Thermal manikin designed for clothing and environmental testing.

  • Liz Female Thermal Manikin
    Liz Female Thermal Manikin

    Thermal manikin designed for clothing and environmental testing on the female form.

  • Baby Thermal Manikin
    Baby Thermal Manikin

    Test thermal comfort properties of infant clothing and gear.

  • Partial manikins
  • Thermal Head Test System
    Thermal Head Test System

    Put helmets and headwear to the test by accurately measuring heat loss.

  • Thermal Hand Test System
    Thermal Hand Test System

    Research the effects of glove design, insulation, and ventilation.

  • Textile testing systems
  • Sweating Guarded Hotplate
    Sweating Guarded Hotplate

    Get accurate, repeatable measurements of thermal resistance (Rct) and vapor permeability (Ret) for textiles.

  • Dynamic Hotplate System
    Dynamic Hotplate System

    Test prototype swatches for positive and negative heat-flux measurements.

  • Drying Rate Tester 201
    Drying Rate Tester 201

    Measure and assess key moisture management features of your textiles with precision and ease.

  • Protective test systems
  • Flame Test Manikin
    Flame Test Manikin

    Test the performance of garments or protective clothing ensembles in a simulated flash fire environment.

  • Flash Fire Cylinder
    Flash Fire Cylinder

    A bench-top textile fire retardant testing cylinder.

  • TPP / HTP Test Device
    TPP / HTP Test Device

    Evaluate a fabric’s ability to block convective and radiant heat penetration to avoid burn injury.

  • Transportation
  • Automotive HVAC Manikin
    Automotive HVAC Manikin

    Measure passenger comfort and environmental conditions in automobile and transit cabins.

  • STAN Thermal Manikin
    STAN Thermal Manikin

    Test thermal comfort and moisture management characteristics of automobile, truck, and airplane seating.

  • Customized solution
  • Help me choose
Custom Solutions
  • Create your solution
  • Test standards
  • Find your product
  • Service and calibration
  • Rentals
  • Events
  • Blog
  • FAQs
  • Webinars
  • Case studies
  • About
  • Contact
  • Parts store

Tag: Thermal Protection Continuum 1D

NFPA 2112

NFPA 2112 Standard on Flame-Resistant Clothing for Protection of Industrial Personnel Against Short-Duration Thermal Exposures from Fire Related Products

NFPA 1971

NFPA 1971 Standard on Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting This standard shall specify the minimum design, performance, testing, and certification requirements for structural fire fighting protective ensembles and ensemble elements that include coats, trousers, coveralls, helmets, gloves, footwear, and interface components. This standard specifies requirements for new structural fire fighting […]

ISO 17492

ISO 17492 More info coming soon. Related Products

CAN/CGSB 155.2

CAN/CGSB 155.2 More info coming soon. Related Products

ASTM F2731

ASTM F2731 Stored Energy Test Standards Firefighters are routinely exposed to radiant heat in the course of their activities, and in some cases, firefighters have reported burn injuries under clothing where there is no evidence of damage to the exterior or interior layers of the firefighter protective clothing. Low levels of transmitted radiant energy alone […]

ASTM F2703

ASTM F2703 Standard Test Method for Unsteady-State Heat Transfer Evaluation of Flame Resistant Materials for Clothing with Burn Injury Prediction This test method determines the thermal performance estimate value (TPP) of materials used in flame resistant clothing for workers exposed to combined convective and radiant thermal hazards. This test method maintains the specimen in a […]

ASTM F2702

ASTM F2702 Standard Test Method for Radiant Heat Performance of Flame Resistant Clothing Materials with Burn Injury Prediction This test method is intended for the determination of the radiant heat performance value (RPP) of materials used in flame resistant clothing for workers exposed to radiant thermal hazards. The test specimen is maintained in a static, […]

ASTM F2700

ASTM F2700 Standard Test Method for Unsteady-State Heat Transfer Evaluation of Flame Resistant Materials for Clothing with Continuous Heating This test method measures the non-steady state heat transfer through flame resistant materials for clothing subjected to a continuous, combined convective and radiant heat exposure. The test standard is used to measure and describe the response […]

ASTM F1939

ASTM F1939 Standard Test Method for Radiant Heat Resistance of Flame Resistant Clothing Materials with Continuous Heating This test method evaluates a material’s heat transfer properties when exposed to a continuous and constant radiant heat source. The specimen is maintained in a static, vertical position and it can be tested under two standard sets of […]

ASTM F1930

Standard Test Method for Evaluation of Flame Resistant Clothing for Protection Against Flash Fire Simulations Using an Instrumented Manikin This test method can be used to measure and compare the thermal protection provided by different materials, garments, and clothing ensembles. This test method provides a measurement of garment and clothing ensemble performance on a stationary […]

ASTM F1060

ASTM F1060 Standard Test Method for Thermal Protective Performance of Materials for Protective Clothing for Hot Surface Contact This test method can be used to quantify and compare the thermal insulation of materials used in protective clothing when exposed for a short period of time to a hot surface with a temperature up to 600°F […]

ASTM F2733

ASTM F2733 More info coming soon. Related products

Stored Energy Test Device

Burn injury prediction for protective gear

The Thermetrics Blog

Conductive and Compressive Heat Resistance

Evaluate the potential for skin injury from textile conductive properties under compression.

Radiant Protective Performance Test Device

Measure and predict the time to second-degree burns following radiant heat exposure to composite fabric systems.

TPP / HTP Test Device

Evaluate a fabric’s ability to block convective and radiant heat penetration to avoid burn injury.

  • 1
  • 2

Thermetrics office

Address:
4220 – 24th Avenue West
Seattle, WA 98199-1216

Phone: (206) 456-9119
Fax: (206) 634-1309
Email:  sales@thermetrics.com

Hours:  Weekdays 9:00 AM to 5:00 PM, Pacific Time.

 

We are closed on all US national holidays.

Get a quote

    You may unsubscribe from these communications or withdraw your consent at any time. For more information on how to unsubscribe, our privacy practices, and how we are committed to protecting and respecting your privacy, please review our Privacy Policy.

    Get in touch

    Hello! What's on your mind? Fill out the form below, and let's talk!

      Are you considering an equipment purchase?

      Are you looking for help with product testing?

      Are you looking for help with an existing product?

      You may unsubscribe from these communications or withdraw your consent at any time. For more information on how to unsubscribe, our privacy practices, and how we are committed to protecting and respecting your privacy, please review our Privacy Policy.

      Home » Thermal Protection Continuum 1D

      Thermetrics
      • About
      • Create your solution
      • Find your product
      • Service and calibration
      • Blog
      • Contact
      • Privacy Policy

      © 2023 Thermetrics. Site by Motive.

      STAY CONNECTED WITH THERMETRICS

        https://thermetrics.com/wp-content/uploads/2021/07/thermetrics-compressed.mp4