You searched for Thermal Management Continuum 3D - Page 3 of 3

ASTM F2371-05

ASTM F2371-05 Standard Test Method for Measuring the Heat Removal Rate of Personal Cooling Systems Using a Sweating Heated Manikin This test method can be used to quantify and compare the cooling provided by different Personal Cooling Systems (PCS’s) worn with a standard outer garment or other specified clothing. The test method is intended to […]

EN 13537

EN 13537 Thermal properties of Sleeping Bags Describes a testing standard where a thermal manikin is used as a measuring device, positioned inside a sleeping bag and placed in controlled cold conditions. Thermal loss is measured when stationary conditions are reached and, applying the result of a calibration procedure, a standard thermal insulation value of […]

EN 342

EN 342 Ensembles and garments for protection against cold (walking manikin test) This standard specifies requirements and test methods for evaluating the performance of clothing ensembles or single garments for protection against cold environments. Its scope does not specifically include headwear, footwear, or gloves but can consider them as part of the tested ensemble. A […]

EN 511

EN 511 This testing standard defines the requirements and methodology for evaluating gloves meant to protect against convective and conductive cold down to -50°C. Testing requires the use of a heated, full-scale (size 9) hand manikin capable of constant, uniform temperature generation over the entire hand surface. Ambient conditions must be maintained to ±1°C. Related […]

ISO 15831

ISO 15831 Measurement of thermal insulation by means of a thermal manikin ISO 15831 describes the requirements of the thermal manikin and the test procedure used to measure the thermal insulation of a clothing ensemble, as it becomes effective for the wearer in practical use in a relatively calm environment, with the wearer either standing […]

What IS a Testing Continuum?

In our earliest days at Thermetrics, our customers helped us understand that a unidimensional approach to product testing only tells you part of the story. The need for a comprehensive and multi-tiered testing sequence is even more apparent when the products you’re developing are the vital tools of performance and safety for end users […]

Search Results for: Thermal Management Continuum 3D

Test Standards

ASTM F2371-05

ASTM F3426-2020

EN 13537

EN 342

EN 511

ISO 15831

ISO 23537-1

Blog

What IS a Testing Continuum?

Other

Thermal & Moisture Management Testing Continuum